Dynamics and spectra of excited states of water-micellar suspensions of single-walled carbon nanotubes

The dynamics of the photoinduced differential absorption and excited-state bleaching spectra of single-walled carbon nanotubes suspended in a micellar solution were studied in the spectral range from 40 to 1000 nm within a time interval from 70 fs to 150 ps under excitation by 50-fs pulses with photon energies 2 and 4 eV. The bleaching and absorption bands were observed in the spectra; the positions of the bleaching peaks were independent of the photon energy of the exciting femtosecond pulse in the range 2–4 eV. It was established that, for delay times shorter than 1 ps, the shape of the differential spectrum of excited nanotubes coincided with the shape of the second derivative of the absorption spectrum of unexcited nanotubes in the frequency range of exciting pulse above 18000 cm^?1 (the range of absorption bands of metallic nanotubes). In the frequency range below 16000 cm^?1 (the range of absorption peaks of semiconducting nanotubes), the bleaching peaks in the differential spectrum of excited nanotubes undergo a high-frequency shift of 200–300 cm^?1 with respect to the second-derivative spectrum of unexcited nanotubes. The excited-state relaxation rate constants were measured. They are well approximated by the exponential dependences and depend on the probe-pulse wavelength. An assumption was made about the nature of the observed spectra of excited nanotubes and about the excitation relaxation.     

Un principe d'invariance relatif à un processus généralisant le mouvement brownien N-dimensionnel

We prove that the generalized random walks associated to a root system R in $\text{R}{}^{\mathrm{N}}$ and a nonnegative multiplicity function k defined on R, converge in distribution (if suitably normalized) to a Markov process with càdlàg trajectories and infinitesimal generator a differential-difference operator on $\text{R}{}^{\mathrm{N}}$ which generalizes the usual Laplacian. To cite this article: L. Gallardo, L. Godefroy, C. R. Acad. Sci. Paris, Ser. I 338 (2004).     

ISLAND—Inverse Square Law Acceleration Measurement Using iNertial Drift

By using a novel free-flying, rotating, optical bench aboard the International Space Station (ISS) as the basis for a measurement of differential acceleration between two gravitating bodies, in principle the Newtonian inverse-square law and the constant of gravitation, G, can be determined at the parts in 10⁶ level.     

Measurement of apex angle of the prism using total internal reflection

Total internal reflection technique is examined critically for the measurement of apex angle of the prism. Recognition of the critical boundary completely specifies the apex angle ‘A’ of the prism by keeping constant the ratio of refractive index of sample fluid (n₁=1.4) to that of glass (n₂=1.7). Recording of observations in the laboratory is dependent upon whether the apex angle ‘A’ of prism is greater than or less than or equal to critical angle ‘r_c’. The minimum value of error function ‘χ’ in the proximity of Abbe angle explain the choice of Abbe type instruments and shown invariant by relating positive ‘₊’ and the negative angle of emergence ‘₋’. Using ray-tracing technique, an expression for the length of the critical boundary ‘l’ is derived and is shown as a measure of the apex angle ‘A’ of the prism.

The choice of the realistic grazing condition leads us to two turning points for which error function ‘χ’ is minimal and yields appropriate option of the measurement of apex angle ‘A’ of the prism. It is further shown that the small error ‘ζ’ crept in the apex angle ‘A’ of the prism can lead to a significant error in the design of Pulfrich type instruments.

Experimental measurements are in-line with the predictions made.     

Effect of the structure of smooth copper surfaces on the accuracy of determination of the optical constants of copper

The accuracy of determination of the optical constants of smooth copper surfaces produced by different technologies is analyzed, with particular attention paid to the consideration of the influence of scattered radiation (which is ignored by many authors) on the retrieval of the optical constants of copper surfaces from reflected radiation. The neglect of scattered radiation can lead to errors as high as 50% in determining the optical constants for bulk copper. For thin films, the errors are much lower. The influence of surface oxidation during measurements in air and surface features of studied objects on the parameters to be determined is analyzed as well. It is shown that errors in determination of the constants are maximal in the plasma resonance region of copper.

     

Nonlinear Amplitude-Phase Effects in Selective Reflection from a Resonance Gas

Selective reflection of a laser wave from a resonance gas is considered for arbitrary intensity, polarization, and angle of incidence on the interface. Variations of the reflection spectra nonlinear in the wave amplitude are studied taking into account the nonlinear increment of the optical phase upon reflection. The result of this increment is a quadrature component of the reflected wave shifted by a quarter period, which may be observed using the homodyning technique (optical mixing). The regularities studied are of interest both for spectroscopy and for nonlinear transformations in the quantum statistics of reflected light.     

Selective photorefractive scattering in LiNbO<Subscript>3</Subscript>:Rh crystals

Photorefractive scattering occurs in rhodium-doped lithium niobate crystals irradiated by coherent light. The photorefractive scattering has both wide-angle and selective components. The results of experimental investigation of selective photorefractive scattering in LiNbO₃:Rh crystals and calculation of the spatial structure of scattering are reported. The selective scattering is regarded as a kind of a frequency-degenerate fourwave vector interaction.     

Synthesis of broadband interference filters: II. Suppression of high reflection bands of the fourth,fifth, and sixth orders

The spectral properties of multilayer interference systems formed by multiple replication of the symmetric ternary period ABCBA are investigated. The problem of synthesis of structures with suppression of adjacent bands of high reflection of the fourth, fifth, and sixth orders among their spectral characteristics is solved. It is shown that there are only six variants of selection of the optical thicknesses of layers in a period. When the high reflection bands of the fourth, fifth, and sixth orders are suppressed, the high reflection band of the first order remains in only four cases. The values of refractive indices of layers for which the problem hasa solution are found. The refractive indices of layers in all six cases are described by different relations determining the dependence of the refractive index of one of the components on arbitrarily selected refractive indices of the other two components.     

Influence of seeded impurities on the fusion reactor operation

In order to study the influence of seeded impurities on ITER like reactor operation the COREDIV code has been extended to include the transport of several sputtered and/or injected impurities. In the COREDIV code the core plasma is treated in the frame of 1D radial transport model whereas in the edge the 2D multifluid code EPIT is used. The EPIT code solves in the slab geometry the MHD equations for densities and velocities for all ions species as well as for electron and ion temperatures. The iteration scheme in the code leads to steady state solution of coupled core and SOL system. The numerical results for Carbon and Nickel plate and seeded impurities Silicon and Neon are presented.     

A novel approach to the acoustic characterisation of porous road surfaces

Porous road surfaces offer an effective means of reducing the generation and propagation of noise from road traffic. However, the porosity of these surfaces can deteriorate over time, leading to a reduction in their noise reducing properties. Efficient methods are therefore required for monitoring this performance. Existing techniques for performing in-situ measurements of acoustic absorption are unsuitable for use within the traffic stream. Static measurements using time domain Maximum Length Sequence (MLS) based techniques have been demonstrated to offer advantages over traditional techniques, presenting the opportunity for measurements under dynamic conditions. This paper describes the design of a system for carrying out dynamic MLS-based measurements. Results are presented which demonstrate that stable dynamic measurements can be carried out at speeds of up to 30 km/h.